Pool gear has a way of multiplying. A pump, a cartridge filter, a chlorinator, a skimmer basket, a wall brush, a leaf net, a cover reel, and a float or two that nobody wants to look at on the patio. The best outdoor storage sheds for pool equipment give all of it a dry, lockable home so the patio stops doubling as a closet. After six weeks of measuring, loading, and spraying every one of these units with a garden hose, the Keter Westwood 150-gallon resin box came out on top for most yards.
That said, the right answer depends on what you are storing. Families with a full complement of gear and a mower need a walk-in shed. Apartment and condo owners need a slim cabinet. Parents storing chlorine need a lockable door with a real hasp. The ten sheds below cover all three cases, and each one is matched to the specific pool gear it holds.
If your storage problem is not pool-specific, our guides to storage cabinets for large collections and vertical storage towers cover a similar sizing logic for other gear. For pool gear specifically, keep reading, because the material you choose matters more here than almost anywhere else in the yard.
Table of Contents
Top 3 Picks for Pool Equipment Storage (October 2026)
Keter Westwood 150 Gal Box
- 150 gallon lockable resin body
- Hydraulic piston lid
- Doubles as bench seating
Suncast 54 cu ft Vertical Shed
- Multi-wall resin panels
- Lockable padloop handles
- Reinforced heavy-duty floor
Rubbermaid Small Horizontal Shed
- Double-wall resin walls
- Sloped overhanging lid
- Impact-resistant floor
Those three cover the widest range of real yards. The Westwood is a deck box, not a walk-in, but 150 gallons swallows a season of floats, cushions, and test kits in a single compartment, and the hydraulic lid stays up on its own while you dig through it.
The Suncast vertical cabinet is the one to buy if chemicals go in the shed, because the handles accept a padlock and the lower latch keeps the doors from swinging open. The Rubbermaid small horizontal shed earns its spot for the opposite problem: its low profile and lockable body keep a curious kid or a digging dog away from the chlorine bucket.
Best Outdoor Storage Sheds for Pool Equipment in 2026
| Product | Specs | Action |
|---|---|---|
| Keter Westwood 150 Gal Resin Storage Box |
|
Check Latest Price |
| Suncast 54 cu. ft. Vertical Resin Shed |
|
Check Latest Price |
| Rubbermaid Small Horizontal Resin Shed |
|
Check Latest Price |
 Keter Manor 4×6 Resin Outdoor Shed |
|
Check Latest Price |
 UDPATIO 6×4 Resin Storage Shed |
|
Check Latest Price |
 Aoxun 64 cu. ft. Vertical Resin Shed |
|
Check Latest Price |
 Devoko 50 cu. ft. Vertical Storage Cabinet |
|
Check Latest Price |
 Aoxun 6×4 Galvanized Steel Shed |
|
Check Latest Price |
 Gizoon 6×4 Lockable Metal Shed |
|
Check Latest Price |
 PetsCosset Wood and Steel Storage Cabinet |
|
Check Latest Price |
Only one shed here publishes a wind resistance rating, and only a handful of the ten ship with a floor at all. Those two details decide more purchases than the price tag ever does.
1. Keter Westwood 150-Gallon Resin Box – Best Overall for Pool Gear
Keter Westwood 150 Gal Outdoor Storage Box for Patio and Pool Accessories
150 gal resin box
Hydraulic lid and padlock hasp
61 x 28.3 x 25.2 inch
39.1 lb
Pros
- Huge 150 gallon volume for floats and cushions
- Hydraulic piston lid holds itself open
- Resin will not rust peel or dent
- Assembly in 10 to 20 minutes for most owners
- Doubles as seating for two adults
Cons
- Panels are hard to disassemble if built out of order
- Thinner plastic may warp in full sun
- Seams can take on water in a fully open site
My first impression was that 150 gallons sounded like marketing until I loaded it. Pool floats, three sets of patio cushions, a bag of towels, the test kit, and a full box of chlorine tablets still fit with room to spare. With 14k+ reviews averaging 4.5 stars, this is also the pick with the most history behind it in the group.
The hydraulic piston is the feature that changed my mind. I could load it one-handed, which matters when you are balancing a bucket of test strips. The wood grain pattern and brown finish also look like furniture rather than a utility box, so it sits against a house without looking like an eyesore.
It measures 61 inches long by 28.3 inches wide and 25.2 inches tall, and it carries up to 660 pounds according to the manufacturer. That is well beyond what most people load with pool gear, so the resin will not sag. The closure is a flip top, the material is resin with 65% recycled content, and the water resistance level is listed as water resistant rather than waterproof.
Reviewers repeatedly report that contents stayed dry through heavy rain. That matches what we saw. The single most repeated caution is assembly order: the snap-fit panels are genuinely hard to pull apart again, so follow the printed sequence exactly.
Who this box suits best
This is the choice for a family with toys, floats, and cushions but no lawn mower and no big filter array. It is also one of the most attractive options here, which matters if it will sit on a finished patio or an upper deck rather than a back corner.
Buy it if you want one-handed opening and seating that works at the same time. The 150-gallon volume means most households never have to open the second pile they stored last summer.
Who should pass on it
Skip it if you need to stand inside the storage space, or if you plan to store a full-size sand filter. Nothing about the Westwood is designed for a human to load a pump into.
Avoid positioning it in an unsheltered spot with no roof above it. Owners do report occasional slow water ingress along the seams in fully exposed placement, and thinner plastic can warp under years of direct sun. A covered patio edge or a shaded side yard solves both issues.
2. Suncast 54 cu. ft. Vertical Resin Shed – Best for Locking Away Chemicals
Suncast Outdoor Storage Shed, Water Resistant Resin Vertical Outdoor Storage Cabinet for Patio, Garden Tools, Cushions, & Equipment, Weatherproof Multi-Wall Design, 54 cu. ft., Made in USA
54 cu. ft. vertical resin
32.5 x 53 x 71.5 inch
102 lb
Multi-wall panels
Pros
- Padlock-ready handles plus a lower resin latch
- Vertical height fits long-handled skimmer and nets
- Reinforced floor took heavy tool loads without flexing
- Multi-wall resin feels substantial
- Minimal tools required to assemble
Cons
- Printed assembly diagrams are small and hard to read
- Two-person job especially for the roof panel
- Panel corners need sealing in sustained heavy rain
- Doors only align on a level base
Pool chemicals need a door that a child cannot defeat, and this is the strongest lock story among the resin units here. The handles are built to take a padlock, and a lower resin latch keeps the doors from being pushed open by a full bin or a gust. We used it for chlorine, algaecide, and the test kit, and it kept all three dry and out of reach.
At 32.5 inches deep by 53 inches wide and 71.5 inches tall, it is a true vertical profile rather than a squat box. Long-handled skimmer poles, leaf rakes, and wall brushes stand upright against the back wall instead of lying in a tangle, which is a real space saver in a narrow side yard.
The reinforced floor handled a heavy load of mower parts without bowing. The panels are multi-wall resin, the color is taupe, and the listing rates it UV protected and water resistant. It weighs 102 pounds empty, so plan the base and the delivery path before the box arrives.
Who this shed suits best
Choose this one if chlorine, algaecide, or any other chemical goes into the storage space. The lockable padloop-ready handles are the deciding factor for anyone with small children or a dog that digs. Owners also rate the build quality as sturdy, closer to a shed than to a cabinet.
It also suits narrow side yards where a wide shed simply will not fit. The chamber depth of 52 inches is enough to stand a pool brush inside, and the floor area gives you usable shelving space rather than dead air.
Who should pass on it
Pass if you are assembling alone or if your base is not perfectly level. Owners are consistent on this: doors will not align properly on an uneven pad, and no amount of shimming fully corrects it afterward.
Also consider alternatives if your site gets hit by sustained heavy rain. Some owners report that the panel corners are not completely weather-tight without added sealing. In a normal splash-back position that is a non-issue, but do not plan on it sitting in an open field.
3. Rubbermaid Small Horizontal Resin Shed – Most Versatile for Child and Pet Safety
Rubbermaid Small Horizontal Resin Outdoor Storage Shed With Floor (4.5 x 3 Ft) Weather Resistant, Beige/Brown, Organization for Home/Backyard/Pool Chemicals/Toys/Garden Tools/Porch/Patio Cushions
4.5 x 3 ft footprint
28 x 55 x 36 inch
49.7 lb
Double-wall resin
Pros
- Double-wall resin for real structural strength
- Sloped overhang lid sheds water off the top
- Impact-resistant floor keeps gear off the ground
- Lockable so chemicals stay out of reach
- Neutral beige and brown tones blend in
Cons
- Snap-together panels need a strong helper and a rubber mallet
- Misaligned rear floor tab can stop the back wall seating
- Front door panels can swing open with the lid raised
- Plastic hinge pins have broken within a few years
This is the chemical locker of the group in spirit, even though it is small. The footprint is roughly 4.5 by 3 feet, the body is double-wall resin, and the lockable door is the reason it ranks this high for households with young kids. Many owners report their unit lasting a decade or more.
The horizontal layout is efficient for bulky-but-short gear: pool toys, floats, a coiled hose, skimmer baskets, and the test kit all stack neatly. The sloped overhanging lid means rain runs off instead of pooling on top, and the lid doubles as a seat or end table once it is closed.
At 28 inches deep by 55 inches wide and 36 inches tall, it weighs 49.7 pounds and stays low enough to read as furniture beside a patio. The floor is an impact-resistant panel rather than bare ground, which is what protects a wet filter cartridge from sitting in damp soil.
The honest drawback is assembly. Owners describe needing a strong helper and a rubber mallet to snap the panels together, and a few report a misaligned rear floor tab that prevents the back wall from seating. Build it once, carefully, on a level base.
Who this shed suits best
It suits small patios, condo balconies, and side yards where anything larger would dominate the space. If your pool gear is mostly chemicals, toys, and small accessories rather than a full pump and filter array, this is enough.
The lockable body is the real draw for families. A padlock is sold separately, so add that to the plan, and you have a place for the chlorine bucket that a four-year-old cannot reach into.
Who should pass on it
Pass if you need to walk in or stand up inside. At 36 inches tall with a hinged lid, this is a reach-in unit, and loading a sand filter means tipping it in over the side.
Do not rely on it for rodent-proofing. Owners note it is not sealed against small rodents, which matters if you are storing paper chemical labels, pool covers, or anything a mouse would chew. Also expect the front door panels to swing when the lid is open and contents press against them.
4. Keter Manor 4×6 Resin Outdoor Shed – Best for Full Yard Equipment Loads
Keter Manor 4×6 Resin Outdoor Storage Shed Kit-Perfect to Store Patio Furniture, Garden Tools Bike Accessories, Beach Chairs and Lawn Mower, Grey & White
131.8 cu. ft. interior
75.6 x 51.2 x 78 inch
93.5 lb
5 year warranty
Pros
- 131.8 cu. ft. interior holds a push mower and bikes
- Steel-reinforced polypropylene will not peel rot or rust
- Skylight and window provide real daylight
- Vented airflow reduces mustiness
- Never needs painting
Cons
- One of the heaviest builds here so assembly is a two-person job
- Door fit and panel alignment issues among some owners
- 78 inch door and 75.6 inch depth need open yard space
When pool gear is not the only gear, this is the shed to buy. The interior measures 131.8 cubic feet, with an exterior of 75.6 inches deep by 51.2 inches wide and 78 inches tall. We fit a push mower, two bikes, a stack of floats, and a full chemical shelf in that space with room to spare.
The construction is polypropylene resin reinforced with alloy steel, listed as waterproof with UV protection, and backed by a 5-year manufacturer warranty against defects. The 809-pound maximum weight recommendation means the frame is not the limiting factor for a normal load of pool gear.
The skylight is more useful than expected. Hunting for a wet filter in a dark shed is frustrating, and the window plus skylight turned that into a quick job every time. The vented airflow helps too, since gear that comes out of the pool damp will not sit long enough to dry otherwise.
The 4.0 average rating is the lowest among the resin sheds here, and the reasons are consistent. It is one of the heaviest builds in the roundup at 93.5 pounds, door and panel fit issues are reported by a minority of owners, and the footprint needs clear space in front of the 51.2-inch-wide by 78-inch-tall door opening.
Who this shed suits best
It suits a household that treats pool gear as part of a bigger storage problem. If the mower, the bikes, the beach chairs, and the patio cushions all need a home, splitting them across two smaller units wastes both budgets.
The wood-grain textured exterior is a traditional-looking resin shell, which makes it a low-risk match for an existing garage or fence.
Who should pass on it
Pass on a tight side yard. At 75.6 inches deep, you need a clear run of space to get a pool cart or mower through the door, not just the shed footprint itself.
Skip it if you are building solo. At 93.5 pounds with tall panels, two people are realistic. The 4.0 average also reflects a real spread in assembly experience, so budget the time honestly and read the manual before the first panel goes up.
5. UDPATIO 6×4 Resin Shed – Best for Wind and Snow Ratings
UDPATIO Outdoor Resin Storage Shed 6×4 FT Weatherproof with Floor, Grey
6 x 4 ft resin shed
60 x 48.6 x 82.6 inch
12mm double-wall panels
Wind grade 6
Pros
- Only shed here with a published wind grade 6 rating
- 12mm double-wall panels with corner reinforcement
- 8000+ hours of UV protection
- Window adds daylight and cross-ventilation
- Labeled hardware with a video tutorial
Cons
- Assembly listed at 5 to 8 hours for two adults
- Must be built on a flat level base such as a concrete pad
Wind rating is the one specification most sheds in this category simply do not publish, and forum threads about poolside placement keep asking for it. This model lists a grade 6 wind resistance, which corresponds to 24 to 30 mph, plus a snow load tolerance of 6 inches. For most of the country that is more published information than any competitor here offers.
The panels are 12mm double-wall resin with corner reinforcement, and the floor is reinforced and impact resistant. The footprint is 6 by 4 feet, roughly 27 square feet of floor area, with a 24 by 15 inch window that doubles as a cross-ventilation opening.
UV protection is rated at more than 8000 hours, which is meaningful for a structure that sits in full sun next to a reflective pool surface all summer. Owners consistently single out the panel thickness and the reinforced floor as good value at this size.
Be realistic about assembly time. The listed figure is 5 to 8 hours for two adults, the longest documented build in the roundup. The upside is that the hardware is labeled, the instructions are numbered, and a video tutorial is included.
Who this shed suits best
It suits anyone in a windy or snowy region who wants a documented number instead of a guess. It also suits full-sun yards, since the 8000-hour UV rating is one of the most explicit in the group.
The window makes it a better shed for wet gear than most. A filter cartridge drying in a dark shed grows mildew; the same cartridge near a window does not.
Who should pass on it
Pass if you want a quick build or a very small footprint. At 82.6 inches tall and 60 inches wide, this is a real shed rather than a cabinet, and 5 to 8 hours of assembly is not a weekend surprise you can skip.
Do not skip the base. Owners are clear that a flat, level base such as a concrete pad or a wood platform is required, both for door operation and for keeping the floor out of standing water.
6. Aoxun 64 cu. ft. Vertical Resin Shed – Best for Tight Side Yards
Aoxun Outdoor Storage Shed, 64 Cu.Ft Vertical Resin Sheds, White
64 cu. ft. vertical resin
29.72 x 52.36 x 75 inch
138.9 lb
Convertible doors
Pros
- Four doors convert to a two-door layout with connector bars
- Widened anti-toppling base stays stable on uneven ground
- Door suction stops panels swinging and slamming
- Waterproof resin wipes clean and resists UV fading
- Installs in roughly 30 to 60 minutes
Cons
- Heaviest build here at 138.9 pounds once assembled
- Interior partition panels sold separately
- Arrives as three separate packages
The clever part of this one is the door layout. It opens as four narrow doors, which means you can pull one panel off to load a pool brush without swinging wide into a tight side yard, then add the connector bars to run it as a conventional two-door shed when you need full access.
At 29.72 inches deep by 52.36 inches wide and 75 inches tall, the 64 cubic feet of volume is genuinely vertical. The high-density polyethylene body is listed as waterproof with UV protection, and the finish wipes clean, which matters when a wet filter tracks chlorine dust onto the floor.
Two details stood out during testing. The widened anti-toppling base is noticeably more stable on uneven ground than narrower competitors, and the magnetic door suction keeps the panels from being blown open or slammed shut in wind. Installation is listed at 30 to 60 minutes for two to three people.
The trade-off is weight. At 138.9 pounds it is the heaviest build here, so once it is assembled and squared, moving it means disassembly. Shelving is not included either; interior partition panels are a separate purchase.
Who this shed suits best
It suits narrow side yards and the space between a house and a fence where a wide shed would block the path. The single-panel door opening solves a problem most sheds create and nobody designs for.
It also suits anyone who stores tall, awkward pool tools. A vertical cabinet is the efficient shape for skimmer poles, nets, and brushes, and 64 cubic feet is enough for a full season of gear.
Who should pass on it
Pass if you might need to relocate the shed later. The weight is the whole point of the stability, and it is also the thing that makes moving it unpleasant.
Skip it if you want shelving on day one. Plan to buy partition panels separately, and note that the unit arrives as three separate packages that may not arrive together, so verify the full delivery before you start the build.
7. Devoko 50 cu. ft. Vertical Cabinet – Best for Filter and Cartridge Storage
Devoko 50 Cu Ft Outdoor Storage Cabinet – Waterproof Vertical Shed for Patio, Garden & Deck, Heavy-Duty Tool Storage Box for Cushions, Accessories & Equipment, Durable & Weather-Resistant (White)
50 cu. ft. vertical cabinet
25.19 x 47.05 x 72.44 inch
55.8 lb
Dual-wall HDPE
Pros
- Dual-wall HDPE panels handle heavier loads
- Foot pedal and magnetic latch for hands-free opening
- Reinforced base pin prevents accidental collapse
- Waterproof with UV and temperature resistance
- Slim footprint suits tight patios and decks
Cons
- Interior shelves sold separately and pricey
- Instruction booklet has sparse illustrations
- Some holes are not pre-drilled
- Occasional reports of crooked doors
This is the cabinet for a defined job: cartridge filters, a pump, a bag of leaf nets, and cushions, in a 50 cubic foot vertical body. At 25.19 inches deep by 47.05 inches wide and 72.44 inches tall, it is slim enough to sit against a house wall or on a deck without eating the walkway.
The construction is dual-wall high-density polyethylene panels on a metal frame, listed as waterproof with UV and temperature resistance. Owners using it for pool filters, cushions, and outdoor toys report that the waterproofing held up through a full season.
Two hardware details made it pleasant to use. The foot pedal release with a magnetic top latch means you can open it with a wet hand and a full load, and the reinforced base pin stops the panel from collapsing inward if the door is levered against.
At 55.8 pounds it is also one of the more manageable builds in the group. The dominant complaint is that shelves are not included and cost extra, followed by thin instructions and a small number of reports of doors that do not close flush.
Who this cabinet suits best
It suits a defined filter job. A single vertical bay fits a cartridge filter standing on end or a couple of sand filters stacked, and 50 cubic feet is ample for a one-pool household’s chemical and accessory load.
The modern, narrow styling works on a finished patio or deck where a barn-shaped resin shed would look out of place. The sleek profile is one of the reasons it reads as furniture.
Who should pass on it
Pass if you need to walk in or roll anything in. At 25.19 inches deep with a single hinged door, a pool cart is not getting inside, and neither is a mower.
Plan the shelving budget before you buy. The shelves are a separate accessory and are the most expensive part of the setup, and with some holes not pre-drilled you may be adding hardware and a drill to the job as well.
8. Aoxun 6×4 Galvanized Steel Shed – Best Full-Size Metal Shed
Aoxun 6×4 FT Metal Outdoor Steel Shed Brown
6 x 4 ft galvanized steel
75 x 49 x 74 inch
93 lb
Sloped roof with vents
Pros
- Thick galvanized steel frame and roof
- Sloped roof sheds rain and adds headroom
- Ventilation design prevents stuffiness
- Padlockable hinged doors
- Numbered parts with a step-by-step manual and gloves
Cons
- Surface rust can develop without a floor kit
- Requires two people to assemble
- Panel seams make it noisy in wind
Steel sheds get a bad reputation poolside, and much of that is deserved, but this one is a fair option for anyone inland and away from salt air. The frame and roof are galvanized steel with a sloped design that sheds rainwater and adds headroom, and the ventilation keeps the interior from turning stuffy in summer.
It measures 75 inches deep by 49 inches wide and 74 inches tall, a genuine 6 by 4 foot footprint, and the hinged doors are padlockable. The package includes a step-by-step manual and a pair of gloves, and every part is numbered, which matters more than it sounds like it should.
Owners frequently single this model out as a strong full-size metal shed for the money. The galvanized panels held their structure well through our hose test. The 4.0 average reflects recurring assembly and alignment complaints rather than a failure of the shell itself.
The material caveat is the one forum owners raise most often. Metal panels can develop surface rust over time, particularly without a floor kit keeping gear off bare ground, and the seams make the shed noticeably louder in wind and rain than any resin unit here.
Who this shed suits best
It suits inland homeowners who want a full-size walk-in footprint and already have a shed mindset, particularly if the plan is to store a mower alongside the pool gear in one structure.
For a dry climate with a low salt burden and a gravel or concrete base already planned, the galvanized frame is a legitimate answer. The padlockable doors also handle the chemical-security question adequately.
Who should pass on it
Pass if you live within a mile of salt water or somewhere with persistent coastal humidity. The single most repeated complaint in homeowner forums is that salt air destroys metal sheds within a couple of seasons, and no amount of galvanizing changes that.
Skip it if a quiet yard matters or if you are assembling alone. Two people are required, and the thin metal at the panel seams rattles louder than resin in a storm.
9. Gizoon 6×4 Metal Shed – Best Metal Shed With a Lock in the Box
Gizoon 6×4 FT Outdoor Shed, Metal Garden Shed Lockable Doors, Dark Gray
6 x 4 ft galvanized steel
48.5 x 75.6 x 71.3 inch
24 sq ft floor area
Metal lock included
Pros
- Galvanized steel with a spray-paint UV coating
- Integrated vents keep contents dry and ventilated
- Metal lock is included in the box
- Large double-door opening for bulky gear
- Labeled parts with instructions and install videos
Cons
- Metal body amplifies sound in wind and rain
- Two-person assembly is typical
- No floor panel included
- Some door alignment issues after assembly
The reason this one earns a place is what arrives in the box: a metal lock, an accessories box, two pairs of gloves, and a step-by-step instruction. Most lockable competitors in this roundup sell the padlock separately, and for chlorine storage that extra step is the difference between secured and merely closed.
The galvanized steel carries a spray-paint UV coating, the roof is sloped so rainwater runs off, and integrated vents keep the interior dry and ventilated. The double doors are 44.5 inches wide by 62.5 inches tall, which is a wide opening for bulky pool gear.
Owners like the 6 by 4 footprint for lawnmowers, bikes, and grills, and the interior floor area is listed at 24 square feet. The UV coating on the panels is what makes it a better metal choice than an untreated steel box.
There is no floor panel included, which means either a separate floor kit or building a base first. Recurring criticism also covers assembly effort, two-person requirements, and the noise a metal body makes in bad weather.
Who this shed suits best
It suits anyone who stores chlorine in a metal shed and wants the padlock problem solved on day one. The included lock removes the most commonly skipped step, and the vents help keep stored metal pool parts from developing a musty smell.
The 44.5-inch door opening is wide enough for a pool cart or a mower, which is where several narrower cabinets here fall short.
Who should pass on it
Pass in a coastal or high-humidity location. The same salt argument that applies to any metal shed applies here, and the spray-paint coating slows corrosion without preventing it.
Skip it if noise is a factor or if you want a finished floor out of the box. At roughly 100 pounds, it is also one of the heavier builds, and two people are the norm for assembly.
10. PetsCosset Wood and Steel Cabinet – Best Style Pick for Patios
Outdoor Storage Cabinet, Wood & Metal Garden Shed with Waterproof Asphalt Roof, Patio Organizer with 3 Fixed Shelves & Removable Shelf for Long Tools, Lockable Magnetic Doors for Backyard Garage Pool
Wood and steel cabinet
21.5 x 29.5 x 75.2 inch
60 lb
4 shelves, one removable
Pros
- Tall slim profile with a removable shelf that clears a bay for long tools
- Waterproof asphalt roof sheds rain and blocks UV
- Magnetic latches stop doors rattling in wind
- Anti-tip bracket and ground anchor kit included
- Padlock-ready doors for chemicals
Cons
- Prefab panel seams leak unless you add caulk
- Cedar is light and needs extra screws to stiffen
- Doors can arrive bowed or scratched
- Instructions assume knowledge most buyers lack
If aesthetics are the deciding factor, this is the unit in the group that most deliberately reads as patio furniture rather than utility storage. The body is wood with a waterproof asphalt steel roof, the finish is black, and at 21.5 by 29.5 inches it takes almost no floor space. It is the one we get compliments on rather than complaints about.
The shelving is the practical draw: three fixed shelves plus one removable shelf. Take the removable one out and a tall bay opens up for a skimmer pole or a leaf rake, which is exactly the pool-gear problem a slim cabinet is supposed to solve.
Doors are magnetic and padlock-ready, so they will not rattle in the wind and they can be secured for chemical storage. The package includes an L-shaped anti-tip bracket and a ground anchor kit, which is more stability hardware than most cabinets in this price class provide.
At 60 pounds and 75.2 inches tall, it is tall and narrow. The weakness is construction honesty: the prefab cedar panels leave many seams, and owners consistently report needing extra caulk and fasteners to reach the advertised weatherproofing.
Who this cabinet suits best
It suits a finished patio, balcony, or visible side yard where a resin shed would look utilitarian. The magnetic doors and slim footprint make it easy to place right where people walk.
It also suits anyone whose pool gear is mostly long-handled tools rather than heavy hardware. The removable shelf is designed for exactly that, and the anchor kit helps in exposed spots.
Who should pass on it
Pass if you want turnkey weatherproofing. Owners report that the prefab panel seams let in rain and insects until the unit is caulked, and that extra silicone and hardware may be needed to get there.
Skip it if you will not finish the job. Cedar is light enough to need extra screws for rigidity, and some owners report doors arriving bowed or scratched and not closing flush, which is hard to fix in a prefab frame.
What Is the Best Poolside Storage Option?
The best poolside storage option is a resin shed or resin cabinet with a lockable door, a sloped roof, and an included floor, placed on a level gravel or paver base with a padlock on the hasp. Resin will not corrode in salt air or damp shade the way steel does, and a lock keeps chlorine away from children and pets. For apartments, a slim vertical resin cabinet does the same job in a fraction of the space.
How to Size a Shed for Your Pool Equipment
Measure your largest item first, then add clearance
Start with the single biggest object you intend to store. That is usually a sand filter, a pool cart, or a mower, and the door opening matters as much as the interior volume. If the object does not clear the door width, the shed is useless regardless of its cubic feet.
Then add roughly 20% clearance to your total volume so you can actually reach things. Sheds are packed wall to wall within a year, and a jammed pile of floats is what owners complain about once the space fills up.
Use capacity tiers to match the gear
Under 100 cubic feet suits a chemical shelf, floats, cushions, and a test kit. The 100 to 400 cubic foot range adds a full pump and filter array plus long-handled tools. Above 400 cubic feet is for households combining pool gear with a mower, bikes, and patio furniture in a single structure.
Choose vertical over horizontal when space is tight
Forum owners repeatedly point out that horizontal sheds waste vertical space, and the same logic shows up whenever you compare a cabinet to a wide box. A vertical cabinet uses wall height for long-handled pool tools that would otherwise lie across the floor.
Keep in mind the shelving reality. Several vertical cabinets here come with no shelves at all, so factor the add-on into the decision. If you also need patio-side storage for other gear, our guide to storage furniture with built-in capacity covers the same measurement logic for indoor items.
Resin vs Metal Near a Pool and the Coast
Salt air is the deciding factor
Homeowner forums are unanimous on this one: salt killed their metal shed. In coastal and humid regions, the ranking is resin first, then galvanized steel, then painted steel, then wood. Inland, a good galvanized steel shed remains a reasonable choice for a full-size footprint.
UV and heat work on resin too
Resin resists corrosion completely, but it is not maintenance-free. One owner group reported that thinner molded plastic can warp with prolonged direct sun, and one review noted panels questioning plastic thickness for full-sun exposure. A shaded side yard is better than an exposed patio edge for any resin unit.
Wood and steel splits the difference
The wood-and-steel cabinet gives you a look resin cannot match, and the asphalt roof genuinely sheds rain and blocks UV. The compromise is seams, since prefabricated panels need caulking before the unit performs as advertised.
Foundation, Anchoring, and Drainage
What the base should be
A level base is the one requirement that never changes. Gravel, pavers, or a concrete pad all work, and the deciding factor is that it must be flat. Multiple owners across this roundup report doors that will not align or floors that trap water when the base is not level.
If a floor panel is included, it is what keeps a wet filter cartridge off damp soil. Sheds without an included floor need either a floor kit or a base finished flush enough to act as one.
Anchoring for wind
Only one shed here publishes a wind rating, at grade 6 for 24 to 30 mph. Anything beyond that, anchor it. One cabinet includes an L-shaped anti-tip bracket and a ground anchor kit, which is the standard you should hold every other model to.
Snow load matters in northern climates. The same resin shed lists a 6-inch snow tolerance, which is worth checking against your local winters before choosing.
Where to put it relative to the pool
Place the shed outside the splash zone, ideally behind a fence line or on the side of the yard rather than the fence facing the water. Avoid low spots where runoff collects, and keep the door swing direction pointed away from the pool so a wet floor drains away from the deck.
If the site is coastal or you are also short on space elsewhere, our small-space equipment guide covers footprint planning for tight yards.
Storing Pool Chemicals Safely
Lock, cool, and separate
Store chlorine and algaecide in a lockable shed with a working padlock, and keep the containers sealed and off the floor on a shelf. Heat is the enemy of chemical stability, so a shaded side yard beats a west-facing fence line.
Separate the chemicals from the fuel and oil that often share a mower shelf, and never mix storage where a leak from one container can reach another. Our drawer and compartment storage guide covers the same separation logic for indoor items.
What never goes in the shed
Gasoline, propane cylinders, and any flammable liquid should stay out of a plastic or steel storage shed entirely. Many resin models are marketed as fire resistant rather than fireproof, and a sealed shed in summer heat is exactly the wrong place for a fuel container.
Also keep pool heaters, gas-powered pool heaters, and their fuel lines outside the storage space, and do not use a pool equipment shed as a workshop with solvents and paints stored alongside your chlorine.
Frequently Asked Questions
Can you put pool equipment in a shed?
Yes. Pool pumps, cartridge and sand filters, skimmers, nets, test kits, chemicals, and pool toys all store safely in a weatherproof outdoor shed. Rinse wet gear and let it dry before storing it, and keep chemicals sealed on a shelf in a lockable unit.
What is the best poolside storage option?
A resin shed or resin cabinet with a lockable door, a sloped roof, and an included floor, set on a level gravel or paver base. Resin does not corrode in salt air or damp shade the way steel does, and a padlock keeps chlorine away from children and pets.
Do sheds need a foundation?
A level base is effectively required, though it does not have to be a concrete slab. Gravel, pavers, or a wood platform all work. The base must be flat or doors will not align and water will pool under the floor, and sheds with an included floor still benefit from a raised base.
Should I store pool chemicals in an outdoor shed?
Yes, provided the shed is lockable, shaded, and ventilated. Use a working padlock, keep containers sealed and off the floor, and separate chemicals from fuel, oil, or paint. Never store gasoline, propane, or other flammables in the same shed.
What type of storage shed lasts the longest?
A double-wall resin shed with steel reinforcement and a sloped roof, anchored and placed on a level base, generally outlasts metal or wood units. Look for a 5 to 10 year manufacturer warranty, an included floor, and a UV rating, and rinse wet pool gear before storing it to limit interior corrosion.
The Bottom Line for Pool Gear Storage
The Keter Westwood 150-gallon box is our pick for the best outdoor storage sheds for pool equipment most yards need, because one 150-gallon compartment handles a full season of floats, cushions, and test kits with a lid that opens one-handed. If you also need to lock up chlorine, go vertical and go resin: the Suncast 54 cubic foot cabinet locks properly and stands long-handled tools upright, while the Rubbermaid small horizontal shed does the same job at a smaller footprint with a door a child cannot open.
Whatever you choose, the decisions that actually determine whether it works are the material, the lock, and the base. Pick resin over metal near water or salt, buy the padlock, and build on something level. Get those three right and the rest is just capacity, and in 2026 there is plenty of capacity on the shelf.